Wind Turbine Generator SE11520

Customized Products and Service SANY custom designs the 2.0MW wind turbine generators to meet your business needs and provides you with the integrated solutions covering site selection, wind assessment, construction, equipment installation and operation of wind farms. High Productivity Optimal CP Operation Technology The optimal CP operation technology greatly increases the turbine's speed regulating range, thus the turbine can run with optimal capacity before reaching the rated power. This significantly improves the power curve, power generation capacity and reduces the cut-in speed and rated wind speed. Low Wind Speed Design Applying to the condition when the annual average wind speed is lower than 5m/s; reducing cut-in wind speed; and increasing generating capability of low speed wind period Hydraulic Yaw Technology SANY patented real-time yaw can realize precise orientation, capture maximal wind power, and real-time cast loose, and avoid stranded cable. Wide Adaptability Good Grid Adaptability By magnetizing the rotor side of the double-fed wind turbine generator, the stator side of the double-fed WTG can output the same voltage and current as the frequency and phase of power grid voltage and carrying out independent active and reactive decoupling control according to requirement. Converter/Main Control System By improving the control algorithm, WTG can automatically adjust the power and rotation speed relationship based on environmental changes (such as air density, temperature and humidity) to increase full-power rectification at a low wind speed and generation. High Reliability Low Voltage Ride through Capability The low voltage ride through test and other certifications guarantee that the wind turbine generator can respond rapidly during the reduction of voltage, generate the dynamic reactive power to support the recovery of grid voltage, and the active power is recovered rapidly after clearing the fault.

 

 

Send Enquiry