This Thin Bed Mortar has been developed using recycled and reused waste material designed to reduce environmental impact, save water, improve energy efficiency, reduce maintenance and maximize building life. The use of alternative materials such as the environmental pollutants viz. fly ash, which works as a major filler and also modifies the product properties alongside some polymers in certain proprietary formulation.
The product are so designed that besides the eco friendly aspect, they give value addition in the performance. There is saving on internal site logistics, labour, time, water and energy and is available in (15 kgs) bag and 45 kgs box, requiring no additions of any water at the job site. It is also free from post and pre curing which is the unique and distinct advantage to the industry, which is already struggling to secure water resource the world over.
Installation
Application over Bricks and Aerated Autoclaved concrete surface preparation
Surfaces must be free of all bond-inhibiting materials, including dirt and other foreign particles, Using a brush, it is strongly recommended to clean any debris off of the Brick and AAC surface to be bonded moments before application and setting. Please do not wet the bricks/blocks before and after application of Greecobond.
Application
Apply Greecobond Thin-Bed mortar with a notched trowel over both the vertical and horizontal surfaces of the Blocks then place in to position. Do not move the bricks/block unit after mortar has set, as this will break the bond.
PS: The first layer on the slab should always be laid with regular mortar only(1:4).
Features
Greecobond has many benefits e.g. It is eco friendly (biodegradable, inert, does not leach out, does not contribute to global warming), does not cause shrinkage (no expansion joints), durable, economical, needs no curing with water, water impermeability, elasticity (not brittle, makes thinner layers possible) adheres to old concrete, stone, easy to repair/maintenance, etc. besides the following.
* Ready to use RTU, wet mix jointing adhesive
* Self curing (Air) -Saves water- no need to wet the bricks before construction, nor curing is required after construction.
* Water resistant
* Walling is ready for rendering/plastering in 72 hrs depending on climatic conditions
* No need for wall reinforcing liners
* No limitations to stop wall construction at heights of 3' to 4'
* Non Hazardous
* Excellent Bonding
* Saves material handling
* No wastage keeps site clean house-keeping at its best
* Crack resistant
* Reusable
* Extended pot life
* Easy to apply
* Saves labor and time
* No supervision required for material procurement and preparation
* Eco friendly as it is carbon neutral and is made out of biodegradable waste and inert material and it does not contribute to global warming.
Packaging
15 kgs bag of wet mix adhesive or in 45 kgs box, with moisture barrier.
Send Enquiry
